Skin – E04, E11, E21, E00, E000 and R20 for cheeks
Lady’s Attire – Y28, Y23, YR24, Y21
Men’s Attire – T9, T7, T4 and 0
Stairs – suspended moon rock ink refill or comparable gray color and black (sparingly) by dropping about 3-5 drops and tgen using a skewer to swirl the ink to create a marbled look to ink. i took the stair die cut and dipped into the shaving cream, which picked up the pigment and transferred to paper. i wiped off the shaving cream and let pieve dry.
Blonde Hair – E44, E39, Y21 and E59
Brunette Hair – E89, E59, E34 and E57
Prismacolor pencils used to create deeper shadows, as well as white gelpen highlights.
I embossed the sentiment with white embossing powder and popped up with foam tape.
Please make sure to visit https://scrappyboy.com/ to see the latest release, as well as other awesome offerings you’ll be sure to fall in love with. The images are so cute, you can mix and match different sets to stretch your stash! The papers and stencils are awesome, too!
To make this 5 1/2 inch square card, I used the following supplies:
Magic Lamp Stencil
Arabian Nights 6×6 Double Sided Paper Pack
Arabian Nights Stamp Set & Coordinating Outline Dies
Coordinating Card stock | Glitter Cardstock
Double-Stick Foam Tape
Gold Embossing Powder
White Gel Pen
Memento Black Ink
5 1/2 x 11 in heavy card base, scored at 5 1/2
Distress oxide inks
1 1/2 in circle punch or die (straight edge and scalloped edge)
I used The Magic Lamp Stencil on a piece of white card stock to make a background! So much fun!
I stamped the genie and the lamp images on white Hammermill card stock in 110 lb weight with Mememto Black Ink.
Genie Bottom – BG10, BG11, BG53, BG13 and white gel pen accents
Bracelets – Y13, Y15 and Y17, YR24
Lamp – Y00, Y11, Y15, YR23 & YR27
I used scraps to adorn my project, just looked for complementary shades from the colors in the patterned paper. Images were popped up with foam tape. Sentiment embossed with Versamark Ink on maroon card stock with Gold Embossing Powder to complete the card. THANKS for checking my project out. If you have questions, don’t hesitate to ask!
I had so much fun making this card. I wanted it to be colorful, like I remember the comic pages used to be, tucked in between the other black and white pages of the Sunday paper. I wanted there to be lots of angles and layers of tone on tone colors behind my focal point, one of the cutest little super heroes you ever did see in a stamp set from http://www.ScrappyBoy.com.
To make this A2 sized card, I used the following:
White Card Base – 4.25 in x 11 in, scored at 5.5 in
Red Card Panel – 5.5 in x 4.25 in
Black Card Panel- 5.25 in x 4 in
White Card Panel – 5 1/8 in x 3 7/8 in
Filmstrip diecut in black
Various Patterned Paper (use up scraps)
Scrap strips in black, red and white for your sentiment
I used Scrappy Boy Stamps’ new slimline comic strip builder frame and ink blended solid blocks of bright colors using distress ink pads in candy apple red, carved pumpkin, squeezed lemonade and peacock feathers on the white card panel. I then ink blended with the same color for a tone on tone with different patterns from a second stencil that Scrappy Boy Stamps released called Half-Tone Dots, as well as another stencil from my stash. The effect you are trying to achieve is movement and interest, so get creative.
I glued the ink-blended panel to the black panel, leaving a small frame around the edge. I then glued the black panel to the red panel and then the double-matted panel onto the card base.
I decorated the front by gluing a filmstrip diecut, after piecing patterned paper from the coordinating 6×6 paper pack called SuperHeros. This was adhered to the card front at an angle with double-stick foam tape for added dimension.
The super hero from the SUPER TEAM set was stamped with Momento Black Ink on Hammermill 110 lb white card stock, colored with Copic markers in the following combinations:
Red Suit – R20, R24, R29, R39
Yellow – Y13, Y15 and Y17
Flesh – E51, E30, E50
Flames – Yellows and accented with red flicks using combos above.
Sentiment stamped with Black ink on a strip of white card stock treated with an anti-static powder bag in my stamp positioner. I then cleaned the stamp, leaving the strip in the positioner in place and stamped the sentiment over the original black impression with Versamark and then applied clear embossing powder and heat embossed the sentiment with my heat gun. I find that by using the positioner, I don’t have to fight with stray black embossing powder flecks and still gets a bold, shiny, black finish on my embossed images. I matted the sentiment with layers of black and red to tie everything together. I left the edges of the sentiment strip with strong, wonky angles for some playfulness. The card was finished off with embossed candy dots in black.
Thanks so much for visiting and sharing ideas on my crafting journey and supporting small business by also visiting http://www.ScrappyBoy.com.
This card features a 2×3 stamp set that was one of the Stamps of the Month. You can see the entire set below.
I used a stamp positioner and the Wreath Builder Stencil from Gina K Designs to create the wreath with chick images and a smaller heart stamp to create the front of my card panel.
I used a rainbow pattern of aqua pigments and colored the images as you would watercolor. I used red to color all the hearts. Once dried, I added a small amount of glossy accents to each of the hearts for added shine and dimension.
To finish my card, I matted several layers and heat embossed my sentiment on a circle punch using black glitter card stock for added interest.
Measurement of my finished card is 5.5 in x 5.5 in square.
Watercolor panel – 4.25 in x 4.25 in
Black Matt – 4 3/8 in x 4 3/8 in
Red Matt – 5 in x 5 in
Black Matt – 5 3/8 in x 5 3/8 in
Red Card Base- 5.5 in x 5.5 in (I glue a piece of lightweight white card stock or copy paper slightly smaller and adhere only at the top so you can write your message easily inside when using darker card bases.
Sentiment heat embossed with Alabaster White on black glitter card stock and matted with red to coordinate with the other layers.
This slimline card was extremely fun to make because Kawaii Cuties from Stamp Anniething has so many images included in each set, slimline cards are how you can have enough real estate to hold ALL THIS CUTENESS!!!!!
I find myself wanting to be late sending all my birthday cards this year, because I am absolutely in love with this sentiment! How cute is the sentiment, “sorry, I’m Choco-late!”
To make this slimline card, I used one of StampAnniething’s slimeline dies. This one is a stitched scallop die. Next, I used a combination of distressed inks from my stash to ink blend the background. I used spun sugar, squeezed lemonade, carved pumpkin, and at the very top I used a little bit of barn door to deepen the pink. I flicked some fresh, clean water onto the panel, as it will cause the distressed ink to react, and leave a bleached effect. I then mounted the ink panel onto a piece of card stock in a darker teal, giving approximately a quarter inch larger than the cut panel. The teal piece measures 3.5 x 8.5.
The first quarter release from Kawai Cuties by StampAnniething has some amazing sets. They are very versatile and you can mix and match on all different projects. This particular card uses the stamp set and coordinating dies from: Life is What You Bake It and I Will Never Dessert You.
I used COPIC markers to color my images. The following combinations were used:
I heat embossed the sentiment using Silver embossing powder on the same colored card stock I matted my base with to keep everything coordinated. To finish off the card, I created a white card-base to adhere my finished panel to. Finished card size is folded, 3.5 x 8.5. The card-base was made with white 110 pound card-stock cut 7 x 8.5, scored at 3.5.
I joined the Brutus Monroe Design Team in 2022 and wanted to share my projects for January 2022. Here is my first project featuring Sweet Candy stamp set and a variety of Brutus Monroe embossing powders.
I had a lot of fun creating backgrounds and design elements, including stamping the images on lunch bag card-stock with Brutus Monroe clear embossing ink and embossing them using Brutus Monroe alabaster white embossing powder. I felt this gave the look of royal icing on gingerbread. For a special touch, I ink blended the edges to give it a an oven baked look.
I finished off the card using white embossing powder on black card-stock using a sentiment from the set, “Thank you for being so sweet.”
Today I am sharing an elegant card using a neutral color pallet, with pops of gold metallic mats behind the embossed sentiment, “Seriously Dough, I Love Every Layer of You.” This card could be used as Valentine Card, Galentine Card, Pick Me Up, Thinking of You, Birthday, Miss You….literally for any person on your list! It’s a great set and can’t wait to see what everyone else makes. If you post a creation using SA products, make sure you tag them using #STAMPANNIETHING in your social media for a chance to win some great prizes.
This set, like I have already said, is extremely versatile and features many yummy gourmet pastry images, a cute little girl and one of those popular layered display trays. To make my card, I used the following Stamp Anniething supplies and have inclulded links for your convenience below.
I used Scrappy Boy Stamps’ set called Practically Perfect (pictured here) to make this slimline style card.
I used a letter-size (8.5 x 11) sheet of Banana Cream card stock from FSJ/Spellbinders to create my card base. You can modify the size to your preference. I then cut a card front that was a quarter of an inch on all sides smaller than the base in Hammermill 100 lb white card stock. I used 2 StampAnniething stencils and dye-based ink to ink blend my background, which included a citycape with the tops of the city buildings being the bottom third of the card.
On the top half, I made a night sky. I used a circle die to create a mask and then placed the sun ray stencil over top of the mask to ink blend to create additional interest. I removed my circle mask, which left clean paper. I used a light yellow to ink blend the circle to create the glowing moon.
I used 2 characters ftom the set: The Chimney Sweep and the girl with the open umbrella. I stamped both images on a piece of Hammermill White 100 lb card stock. I used my Copic 100 marker to color in the girl with the umbrella, as I wanted to make her look like she was in the shadows. You can use a black Sharpie, too. Color in everything to create a silouette.
Next, I colored up the Chimney Sweep.
Skin- E04,E11, E21, E00, R20 and E000
Hair – E89, E59,E34 and E57
Clothes & Hat – B000,B21, B23 & B26 (dirty them up using various T-family markers)
I used the T-family to create soot on his face.
I used some scrap black card stock and stamped the sentiment using Versamark ink and Brutus Monroe Alabaster White embossing powder to heat emboss the sentiment.
Intentionally put aside some time this weekend to do some crafting. Used the Colorado Craft Company stamp set , “Sweet Friend – Cupcake.” This was such a fun image to color and due to its substantial size, can be cut in half to make two separate A2 sized cards.
Here is a card I made last year featuring Tombow water-based markers and Art Impression stamps.